weberep epo 412 FC

New Product


High strength trowel grade, epoxy resin fairing coat weberep epo 412 FC is a thixotropic two component product based upon solvent free epoxy resin, graded fillers and thixotropic agents. weberep epo 412 FC shows no shrinkage. It ensures a bonding that is waterproof and resistant to atmospheric corrosion in extreme climates.


Surface of application

Wall, Floor

Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman
6 kg 6 kg 6 kg 6 kg 6 kg 6 kg 6 kg 6 kg


Documentation and brochures

To know before applying

- All surfaces should be clean, sound, dry and free from grease, laitance, oil and dust - Remove all loose material - Moisture content should not exceed 5% - After mixing, keep the mix to rest for 2 min before the application

For more information please refer to the technical data sheet of the product

Features and benefits

  • Applied over large areas
  • Addition of dry silica sand
  • Thixotropic


- Do not add solvent, water or thinner at any time during the mixing or the application - After the application immediately remove the weberep epo 412 FC from tools and equipement using toluene or xylene