weberep epo 420 SC

epoxy_3_components_packaging_for_website_01.jpg

 

Epoxy floor resurfacing compound weberep epo 420 SC is a three- component system based on epoxy resins and selected fillers. It provides a resilient system for floor repairs and resurfacing, non absorbent and dust free.
The selected fillers enable the system to hold thickness and give weberep epo 420 SC a high resistance to abrasion, as well as a high tensile and compressive strength.

 

Surface of application

Wall, Floor

Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman
17.8 kg 17.8 kg 17.8 kg 17.8 kg 17.8 kg 17.8 kg 17.8 kg 17.8 kg
27.8 kg 27.8 kg 27.8 kg 27.8 kg 27.8 kg 27.8 kg 27.8 kg 27.8 kg

Documentation and brochures

To know before applying

- The substrate must be sound, clean, dry - Blasting with light shall be performed in oder to cause deep irregularities on the substrate - Surface should be free from laitance , dirt and loose concrete remains - All cracks over 1.6mm wide should be widened to the dimensions of 6.3m wide and 6.3 mm deep prior to the application of wberep epo 420 SC - After surface preparation, prime any smooth areas with Eposil plus

For more information please refer to the technical data sheet of the product

Features and benefits

  • High resistance to abrasion
  • High tensile strenght
  • Compressive strength

Constraints

- All material should be within the proper temperature range of 10°C to 40°C  for at least 24 hours prior to mixing -  For large application with less than 1 cm thickness, a special packaging of 17.8 kg kit is recommended - weberep epo 420 SC can be applied up to 50 mm thickness