webertec 301 HCS
Non shrink very high strength grout
webertec 301 HCS is a blend of portland cement, special admixtures and proprietary aggregates designed to provide high flexural and compressive strength performance from plastic to fluid consistencies. webertec 301 HCS is non-metallic, non-shrink, non-gas forming and contains no chlorides or aluminum powders. It is specially used when repair of high strength concrete is required.Surface of application
Wall, Roof, Floor
UAE | KSA | Lebanon | Oman | Qatar | Kuwait | Jordan | Egypt |
---|---|---|---|---|---|---|---|
25 kg, 50 kg | 25 kg, 50 kg | 25 kg, 50 kg | 25 kg, 50 kg | 25 kg, 50 kg | 25 kg, 50 kg | 25 kg, 50 kg | 25 kg, 50 kg |
- Non-shrinking
- High strength Liquid or plastic consistency
- Substrate must be sound and resistant
- Substrate should be saturated with water a few hours prior to installation
- Remove all water used in wetting support prior to installation of webertec 301 HCS
- Do not mix with other hydraulic binders
- In shoring applications, hole diameter must not exceed 20 cm
- For grouting and jacketing application, thickness above 10cm can be practiced up to 30cm in case of epoxy anchoring rebars installation in the existing structure
- If the application temperature is higher than 35°C, make sure to use cool water to keep the mixed grout temperature below 30°C