webercal 210

formerly Decofacade.210 AD
weber.cal_210.JPG

 

Decorative render with aggregates webercal 210 is a pre-blended powder mix. The principal binder is Portland cement which performance is reinforced through the addition of powder polymers. It includes additives to improve water retention and adhesion, thus minimizing occurrence of cracks. A hydrophobic agent is also incorporated to improve waterproofing characteristics. webercal 210 is used over cement based substrates where a wide range of aggregates needs to be spread

 

Surface of application

Wall

Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman
25 kg 25 kg 25 kg - - - - -

Documentation and brochures

To know before applying

  • Substrate must be clean, sound and free from greasy matters and dust. Remove all traces of paint, mould oil which may affect the adhesion
  • webercal 210 is applied using a stainless steel or plastic corrugated trowel.
  • The material can be applied on a thickness of 5 mm for small aggregates and 10 mm for medium and big ones.
  • While the applied product is still wet, spread the aggregates manually or by a spray gun.

For more information please refer to the technical data sheet of the product

Features and benefits

  • Mosaic appearance on facade
  • wide range of aggregates colors
  • weatherproof and durable

Constraints

  • Before starting the application, we highly recommend to design joints every 25 m²
  • Before the application the substrate must be sufficiently cured in a way that any shrinkage has already occurred
  • Directly before the application of weber.cal 210, moisten the substrate and wait until it becomes dry at the surface.

This product fits for these following projects