webercote beton

webercote-beton-25-kg.png

 

Protective anti-carbonation coating for concrete webercote beton is an anti-carbonation protective coating for exposed concrete and resistant to chloride penetration with good permeability to water vapor diffusion. The elastometric nature of webercote beton ensures good crack bridging properties.

 

Surface of application

Wall

Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman
20 kg 20 kg 20 kg 20 kg 20 kg 20 kg 20 kg 20 kg

 

Colors

  • webercote beton 200
  • webercote beton 506
  • webercote beton 656
  • webercote beton 165
  • webercote beton 166
  • webercote beton 164
view full palette

Documentation and brochures

To know before applying

  • Mineral and masonry substrates e.g. cement plasters and cement renders must be completely dry, hard and free of shrinkage and movement
  • Remove mould oil from concrete surfaces
  • For renovation the substrate should be free of old plaster and any loose material and peeling paint
  • Apply weber cote beton with a brush or roller

For more information please refer to the technical data sheet of the product

Features and benefits

  • Protects substrates from Carbonation
  • Excellent weathering resistance
  • Elastic nature
  • Allows structure to "breathe"
  • Water based and non-toxic
  • Easy to clean
  • Single pack and easy to apply

Constraints

  • Do not apply on wet or frozen surfaces, or where there is a risk of freezing within the next 24 hours
  • Avoid application in full sunlight or in a strong wind
  • On large surfaces, it is good practice to interrupt application around joints and rain channels
  • If higher thickness then 300 microns is required,a third coat could be applied.

This product fits for these following projects