weber euroflor Design
Rapid hardening tension relieved self-leveling design floor, with a layer thickness from 2 to 50 mm.
weber euroflor Design is a rapid hardening self-leveling,dimensionally stable, eco green system, carefully produced based on environmentally friendly binder, to bring out an incomparable esthetically pleasing surface design floor.weber euroflor Design can be used internally and externally,for leveling differences in thicknesses from 2 to 50 mm,on new or existing substrates.Surface of application
Floor
UAE |
---|
23 kg |
- Unlimited colors and designs
- UV stable suitable for outdoor application
- Crack free Low carbon footprint
- Environmentally friendly
- Dimensionally stable
- High abrasion resistance
- High surface tensile strength
- Mineral based, single component Very low emission
- Meets EMICODE EC1PLUS
- Resistance against salt water and chemicals
- Can be exposed to a temperature of -40°C to 500°C
- Water vapor permeable
- The substrate must be structurally stable, crack-free,permanently vibration-free and having a sufficient surface tensile strength
- The edge joint must be prepared with a suitable expansion strips Prior to weber euroflor Design application
- The substrate must be vacuumed and primed with weber euroflor Prime, using a soft brush or a roller
- weber euroflor Design should be applied as soon the color of the primed surface change from white to clear
- For heavily cracked substrates and to avoid reflective cracks, it is highly recommended to treat the surface with crack suppression membrane