weberfloor anti-crack
High adhesion crack suppression membrane
weberfloor anti-crack is a highly deformable, fast setting membrane,carefully produced based on an environmentally friendly polymer modified binder, to bring out a unique crack bridging layer that has optimal strength and flexibility to withstand structural movement and concrete shrinkage cracks up, without transferring the stress load to the final overlay.Surface of application
Floor
UAE | QATAR | KWT | OMAN | KSA |
---|---|---|---|---|
20 KG | 20 KG | 20 KG | 20 KG | 20 KG |
- Crack bridging
- High
deformability - High adhesion
- High flow-ability
- Water vapor permeable
- Fast hardening
- Fast setting
- Concrete substrate should be at least 28 days old and has sufficient surface tensile strength (at least 1 N/mm² for light and medium traffic floor,1.5 N/mm² for industrial floor)
- The surface must also be structurally stable and crack-free.Thus, any crack must be repaired prior to weberfloor anti-crack application
- All surfaces should be cleaned, dry, and free from grease, laitance, oil, dust, paint or any other substance that may prevent or reduce adhesion
- Remove all weak, loose, smooth, or broken pieces of concrete until it reaches a sound rough concrete
- Depending on substrate conditions, deeper ruptures and cracks must be filled with weberfloor epopatch (up to 3 mm) and weberfloor epolevel (3 to 10 mm)