weberfloor 4850 VR

New Product
Weber Middle East

weberfloor 4850 VR is a very low emission, low odor,dispersion adhesive designed for laying of homogeneous and heterogeneous vinyl panels/sheets and rubber sheets. It is based on a very special type of synthetic resin with very high performance additives fine grade mineral fillers and tackifier to produce a high degree of tack.

Surface of application

Floor

Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman
        16 kg      
               

Documentation and brochures

To know before applying

The adhesive must be stirred before use and then applied and spread evenly with a toothed spatula.
For PVC, PUR or PVC foam backing apply floor 4850 VR with A1 or A2 toothing spatula.For rubber coating Apply with A2 toothing spatula.
Allow the product to cure for approx. 5 to 15 minutes before laying the floor covering.(depending on the tool, temperature and substrate).

For more information please refer to the technical data sheet of the product

Features and benefits


 Easy to apply
 No discoloration even in thin PVC-coatings
 Suitable for wheelchairs under coatings
 High resistance to plasticizer migration
 EMICODE EC1 PLUS: very low emission
 Excellent Tack and Bonding
 Excellent Adhesion and high Strength
 Water Resistant
 Non Toxic and Non Flammable
 Antifungal

Constraints

It is essential to ensure good contact between the floor covering and the adhesive.
Bonding over existing floor coverings should be avoided.
Clean any excess of adhesive using water immediately.
Do not allow the adhesive to dry, after complete dryness of the adhesive ridges, covering laying is no longer possible.
Make sure to Avoid any holes after spreading the product.

This product fits for these following projects