weberfloor 600 SCR-L
Fiber reinforced dry ready mix screed
weberfloor 600 SCR-L is a ready mixed cementitious screed made with selected aggregates, additives and fiber. Ready to use, weberfloor 600 SCR-L is to be simply mixed with water on site. It can be used to level the surface prior to the installation of other floor products such as weberfloor 510 SOL or weberfloor 515 PSC. Tiles can be laid down on top of weberfloor 600 SCR-L after screed has fully acquired its compressive strength.
- High strength
- Easy to apply & clean
- Anti-crack
- Suitable for wide range of tiles
- Flowable
- Eco-friendly
- Faster job
Surface of application
Floor
Jordan | Lebanon |
---|---|
50 kg, 25 kg | 50 kg, 25 kg |
Easy workability. Surface leveling before other floor products.
- Application maximum thickness 5 cm per layer.
- Can be covered with tiles.
- Weberfloor 4716 Primer should be applied before applying the screed.
- Not applicable on wet substrate.
- Not suitable to be covered with PVC, vinyl, rubber, linoleum, parquet.
- Not applicable over tiles, or wood substrate.