weberjoint pavement New Product
weberjoint pavement is a cement-based pavement jointing compound with exceptionally high mechanical strength and bonding capability.
weberjoint pavement is specially designed to withstand the harsh conditions that exterior road pavements are subjected to.
weberjoint pavement will endure the difficult conditions of loads, traffic (pedestrian/vehicular), abrasion, temperature variations etc. while providing a durable ecstatic finish.
weberjoint pavement is specially designed to withstand the harsh conditions that exterior road pavements are subjected to.
weberjoint pavement will endure the difficult conditions of loads, traffic (pedestrian/vehicular), abrasion, temperature variations etc. while providing a durable ecstatic finish.
KSA |
---|
25 kg |
- High flexural strength
- High compressive strengths
- Highly durable and resilient
- Excellent resistance to vibrations and loads
- Best retains intended aesthetical and architectural finishes
- Easy to work with on floors having a slightly flowable consistency
- Mixing water ratio
- The ideal application temperature is between + 5ºC and + 35ºC
- Mix weberjoint pavement packages that has been stored in shaded areas away from direct sunlight and with clean cool water insuring a mix temperature not exceed 30 °C
- Apply weberjoint pavement into previously identified areas of around 50 m2 each
- Rapidly remove excess weberjoint pavement of the stones' surfaces
- Protect finished areas against rapid drying from wind, sun and excessive heat by covering properly with sealed plastic sheeting or with a damped burlap cloth
- weberjoint pavement can be used for a joint of around 5 cm width and 10 cm depth
- Allow grouted joints to harden for two days after grouting prior to medium traffic
- Allow grouted joints to harden for minimum seven days after grouting prior to heavy traffic