webedry RBE-K
Rubberized bitumen cold applied emulsion
- All surfaces to which weberdry RBE-K is applied must be sound, stable with an even finish and free from dirt, dust, loose debris or grease
- Cracks and holes must be repaired before application of weberdry RBE-K
- Cementitious surfaces must be dampened with clean cold water to facilitate application. Care should be taken to remove excess water before application
- For hot, very dry or porous surfaces and if primer is required ,weberdry RBE-K can be diluted 1:1 in water and can be used as a prime
Surface of application
Floor, Wall
KSA |
---|
20 Lit, 200 Lit |
- Easy to apply
- Wide range of applications
- Excellent adhesion on most substrate
- Waterproof coating
- Vapor/salt barrier
- Highly flexible
- Chemical resistant
- Withstand severe weather conditions
- Not to apply weberdry RBE-K in wet weather or when rain is expected, in the coming 48 hours
- Allow primed surface to become touch dry then apply an undiluted coat of weberdry RBE-K to avoid sagging