Self-ad P

Product formerly named: formerly P 4mm


A pre-fabricated reinforced multi-ply waterproofing for structural concrete Self-ad P  is a self adhesive cold applied modified bituminous waterproofing sheet membrane. Preformed by impregnating and coating a robust, rotproof, damage-resistant core reinforcement with a polymer-modified rubber compound, it comes with a polyester reinforcement.


Surface of application

Wall, Floor, Roof

Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman
1x15 m 1x15 m 1x15 m 1x15 m 1x15 m 1x15 m 1x15 m 1x15 m


Documentation and brochures

To know before applying

  • The surface must be clean, smooth and free from any laitance or loose particles.
  • The surface should be fully dry
  • Heat the prime surface before applying the membrane, with a gas torch or hot air blower
  • At temperature below 5 ºC surfaces should be free from condensation

For more information please refer to the technical data sheet of the product

Features and benefits

  • Provide excellent barrier against vapour and water.
  • Ideal for the protection of substructures where corrosive ground water salts are present.
  • Excellent elongation and recovery characteristics.
  • Self sealing to minor punctures.


  • Application of the product need a trained applicator.

Associated products