weberdry 107 HFX
Highly flexible waterproofing/ damp-proofing coating (grey)
weberdry 107 HFX is a highly flexible polymer modified, hydraulic cement based, two-component system consisting of dry Component A (special cement+additives) and liquid Component B (acrylic copolymer+additives).
Surface of application
Floor, Wall
| UAE | KSA | Lebanon | Oman | Qatar | Kuwait | Jordan | Egypt |
|---|---|---|---|---|---|---|---|
| 15 kg kit | 15 kg kit | 15 kg kit | 15 kg kit | 15 kg kit | 15 kg kit | 15 kg kit | 15 kg kit |
- Suitable for Hand and spray applications
- Easy to apply by brush or in thin trowel applications
- Excellent flexibility at low temperatures
- The substrate must be perfectly sound, clean, and free from grease, oil, dust or any friable matters
- Recommended cleaning methods are high pressure water cleaning and sandblasting
- Any damage or concrete defect should be repaired in advance.All corners should be saw-cut and filled with a non-shrink thixotropic mortar like weberep 331 TX. All honeycombs or holes should be widened and filled with a non-shrink mortar like weberep 350 NSG
- It is necessary to stop any running water prior to the application of weberdry 107 HFX. Use a fast setting cementitious plugging mortar (weberdry 150 BLC) to seal water leaks
- Before applying weberdry 107 HFX, damp abundantly the substrate to be treated
- Do not exceed maximum layer thickness
- In dry weather, wind or sunshine, take all necessary measures to prevent the coating from violent draughts
- Avoid direct exposure to sunshine. Work in the shade if possible
- weberdry 107 HFX will not bond to surfaces that have been treated previously with a water repellent
- When needed, flood test on weberdry 107 HFX can be carried out prior tiles fixing
- Allow one week curing before flood test
- Remove weberdry 107 HFX from tools and equipment with water. Hardened material can only be removed mechanically