weberprim EP 2K
Mounting mortar for light weight blocks
weberprim EP 2K is a transparent, rigid, two component epoxy primer. Water-based, used as a universal primer in waterproofing, sealing and floor coating applications on absorbent and non-absorbent surfaces. Cures by reaction (cross linking) of the two components.
Surface of application
Floor, Roof
| UAE | KSA | Lebanon | Oman | Qatar | Kuwait | Jordan |
|---|---|---|---|---|---|---|
| 4kg, 20kg | 4kg, 20kg | 4kg, 20kg | 4kg, 20kg | 4kg, 20kg | 4kg, 20kg | 4kg, 20kg |
- Simple application (roller or brush)
- Excellent anchoring to absorbent and non-absorbent surfaces
- Can be applied on moist surfaces, without loss of adhesion
- Resistant to stagnating water
- Can be diluted with water Provides high tensile and impact strength
- All surfaces should be clean, dry and free from grease, laitance, oil or dust
- Remove all loose material
- Moisture content should not exceed 7%
- Substrate compressive strength should be at least 25 MPa
- Possible surface irregularities need to be smoothened
- The mixing of the components has to be effected very thoroughly, especially on the walls and bottom of the pail until mixture becomes homogeneous
- For best results, the temperature during application and cure should be between 5°C and 35°C
