weber seal prime PS
Ready mixed spatterdash slurry coat for light weight blocks (autoclaved aerated concrete blocks)
weber seal prime PS is a single component especially developed primer to enhance the bonding of polysulphide sealant with the porous substrates such as cement , concrete , wood , stones etc.
Surface of application
Floor, Roof
| UAE | KSA | Lebanon | Oman | Qatar | Kuwait | Jordan |
|---|---|---|---|---|---|---|
| 1 lt | 1 lt | 1 lt | 1 lt | 1 lt | 1 lt | 1 lt |
- Easy application by brush
- Deep penetration into the substrate due to its low viscosity
- Enhances the bonding of sealants with substrates
- Resistant to UV rays and weathering conditions
- All surfaces have to be clean, thoroughly dry and free of oil with no loose particules remaining
- weber seal prime PS can be applied by a brush
- Primer not to be used for non- porous substrate
