weberdry 600 i

Product formerly named: formerly "Conrep.i 600"
conrep.i_600_01.jpg

 

Flexible water sealing two component polyurethane injection resin weberdry 600 i is a two-component flexible polyurethane injection resin with very low viscosity. weberdry 600 i reacts in wet or dry cracks and joints. When weberdry 600 i comes in contact with water the material will react and expand. In absence of water, will react into a flexible seal.

 

Surface of application

Ceiling, Wall, Floor, Roof

Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman
10.5 kg 10.5 kg 10.5 kg 10.5 kg 10.5 kg 10.5 kg 10.5 kg 10.5 kg
25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg 25 kg

Documentation and brochures

To know before applying

  • Injection in wet and dry structures
  • Injection of very fine cracks
  • Mix the two component in the correct ratio and inject this mixture through a pump within the pumpable time or work with a two-component pump (volumetric ratio of 1:1).

For more information please refer to the technical data sheet of the product

Features and benefits

  • Excellent adhesion to concrete
  • Can be used both for dry and wet cracks
  • Penetrates deep in fine cracks.

Constraints

  • weberdry 600 i is sometimes combined with other PU water reactive foams (for example dry 600 i) to create a flexible PU foam.
  • Clean pump and equipment with cleaner every time there is a stop of more than 15 minutes or whenever necessary and at the end of the injection.

This product fits for these following projects