Features and benefits
- Non-shrinking
- High strength
- Good resistance to sea water and to high-sulphate
Constraints
- weberep ST must be used witin one hour from mixing - For thickness more than 50mm, it is recommended to apply weberep ST in 2 layers
weberep ST
Non metallic non shrink fiber reinforced repair mortar weberep ST is a ready-to-use mortar mainly made of sand (reconstituted grain size range), special cement, fibres and additives that provide unique properties: non-shrinking, high strength, high adhesion and compactness. The highly compacted grains slows down carbonation.
Surface of application
Wall, FloorAvailable packaging
| Lebanon | Syria | Jordan | KSA | UAE | Qatar | Kuwait | Oman |
| 25 kg | 25 kg | 25 kg | 25 kg | 50 kg | 25 kg | 25 kg | 50 kg |
Documentation and brochures
- Safety datasheet weberep ST - Safety datasheet (PDF - 130,83 KB) Download • Send
- Technical datasheet weberep ST - Technical datasheet (PDF - 225,13 KB) Download • Send
- Technical datasheet weberep ST - TDS UAE (PDF - 125,72 KB) Download • Send
- Technical datasheet weberep ST - TDS KSA (PDF - 138,83 KB) Download • Send
To know before applying
- Remove damaged concrete and laitance - The area must be surrounded by clean edges - Brush or scrape corroded steel and remove dust from all surfaces to be fixed - Saturate the surface with water just before application
For more information please refer to the technical data sheet of the product
