Decorative mineral and organic renders for new and old buildings
Single layer mineral decorative rendering mortar for facades
Decorative mineral weatherproof renders for internal and external use, available in wide choice of colors
Polymeric acrylic decorative renders with different textures and a wide choice of colors.
External Thermal Insulation Composite System with adhesives anchoring and embedding mortars
Anti-carbonation protective coating for exposed concrete with resistance to chloride penetration and good permeability to water vapor diffusion.
Increase bearing load
Waterproofing of accessible roofs and terraces
Waterproofing of exposed roofs
Bedding of machine plates
Grouting and protection of post-tensioned cables
Repair of manhole covers and grids
Repair of superficial concrete damage
Repair of damaged slabs and horizontal elements
Repair of cracks in reinforced concrete
Anchoring of steel bars in concrete
Repair of damage with exposed steel reinforcement
Some areas require materials with high chemical resistance; such as
food and beverage industries, chemical industries, car showrooms...
The outstanding aesthetic qualities of certain special tiles can often hide the fact that extra care will be needed when fixing. Generally, the back of special tiles can be very dense or smooth, ...
It is important to use a flexible adhesive and a high performance grout with for external applications.
Use a fast setting adhesive to avoid bending/warping of thin tile edges.
Swimming-pools are the ultimate wet areas for tiling, due to severe
usage and maintenance conditions.
Joints are very important elements because they have technical
properties such as stress absorption originated from the tiles and
Gypsum plaster loses nearly its cohesive strength when wet, so it needs to be protected in areas where it
could be subject to wetting such as wet areas.Therefore a protection is required when ...
Select a flexible adhesive and leave a 4 mm minimum joint width between tiles when fixing large tiles.
Constraints on job sites frequently involve to put the site back in service quickly, especially in public areas like restaurants, airports, hospitals, etc… and also in commercial (shops, ...
Fixing material must be chosen to suit the level of exposure to water.
Increased difficulty in achieving a flat finished surface
Difficulties with non-porous surface ... Standard cement based tile adhesives rely on a mechanical adhesion
to bond onto the substrate. The wet cement engages physically with
small irregularities, ...
The existing design of a balcony should be of a rigid concrete construction, with a slope of 1.5 mm/m towards drainage point.
Limestones, granite, marble, slates…Each type of natural stones has its own technical or aesthetical characteristics, and their composition can vary a lot compared to standard ceramic tiles.
See all solutions
Nowy Swiat 2.0
WARSAW / POLAND
Plant "Waterfall PRO
SHAHTY / RUSSIA
Publishing house "Prof-Press
AKSAI / RUSSIA
AMG Performance Centre Showrooms
CAPE TOWN, JOHANNESBURG, PRETORIA / SOUTH AFRICA
Copperhill Mountain Lodge
ÅRE / SWEDEN
STOCKHOLM / SWEDEN
VÄXJÖ / SWEDEN
ÖREBRO / SWEDEN
Home Ceramic Center
CHANTABURI / THAILAND
Barut Sensatori Hotel
FETHIYE, MUGLA PROVINCE / TURKEY
Al Ain Zoo
DUBAI / UAE
DUBAI / UAE
all our project references