Calculate U Value

Select local thermal regulations
Target U Value : W/m2.k Calculated U Value : W/m2.k
Component Thickness
(mm)
Thermal
Conductivity
(W/m.K)
Indoor Components
Substrate
Glue
Insulation Board
Base Coat
Finishing

*RSi (interior surface thermal resistance) = 0.13

*RSe (exterior surface thermal resistance) = 0.04

*The thermal conductivities values of the indoor components and substrates are standard values.


*The results of this estimator tool are for guidance only and it might vary depending on your building configuration.

You should always check and verify your required quantities before ordering.

We recommend to contact us for further information