webertec 311 MC

webertec_311_MC.jpg

 

Non shrink fluid micro concrete webertec 311 MC is a ready-to-use micro concrete made of selected sand and aggregates, special cement and additives. It can be used where high compressive strength is required. webertec 311 MC is specially formulated to produce a shrinkage compensating micro concrete with high performance. webertec 311 MC can be applied in thickness ranging from 50 mm to 300 mm per layer although greater thickness up to 500 mm can be practiced depending on the design of the repair job and the level of steel reinforcement.

 

Surface of application

Wall, Floor

Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman
39 kg 39 kg 39 kg 38 kg 78 kg 39 kg 39 kg 39 kg

 

Documentation and brochures

To know before applying

- Remove damaged concrete and laitance by chipping - The surface must be free from any trace of grease or oil - Saturate the surface with water just before application

For more information please refer to the technical data sheet of the product

Features and benefits

  • Non-shrinking micro concrete
  • High strength
  • Easy to apply

Constraints

- The use of additives is prohibited - If the application temperature is higher than 35°C, make sure to use cold water to keep the temperature of the freshly mixed micro concrete below 30°C