webertec epo 430 GRT Plus
Free flowing high strength epoxy grout
webertec epo 430 GRT Plus is a three-component high flow epoxy grout: resin, hardener and specific fillers. The mix of these components gives a very resistant, waterproof and non-shrink resin grout. webertec epo 430 GRT Plus is particularly recommended for grouting and bedding applications where it is used for its fluid consistency.
Surface of application
Wall, Floor
| UAE | KSA | Lebanon | Oman | Qatar | Kuwait | Jordan |
|---|---|---|---|---|---|---|
| 17.8 kg, 59.3 kg, 105 kg | 17.8 kg | 17.8 kg | 17.8 kg, 59.3 kg, 105 kg | 17.8 kg | 17.8 kg, 59.3 kg | 17.8 kg |
- Resistance to heavy mechanical stress
- Anti-skid property
- Highly chemical resistant
- The concrete should have at least 28 days setting
- The substrate must be clean and free from all loose particles, dust, laitance, rust and oil
- The minimum concrete compressive strength necessary should be 25 Mpa
- The substrate must not contain more than 6% moisture
- Do not add water or solvent to the mix
- Applicable temperature from 8°C to 45°C