webercote beton
Protective anti-carbonation coating for concrete
webercote beton is an anti-carbonation protective coating for exposed concrete and resistant to chloride penetration with good permeability to water vapor diffusion. The elastometric nature of webercote beton ensures good crack bridging properties
Surface of application
Wall
Colors
| Lebanon | KSA | UAE | Qatar | Oman | Kuwait | Jordan |
|---|---|---|---|---|---|---|
| 20 kg | 20 kg | 20 kg | 20 kg | 20 kg | 18.9 lt | 20 kg |
Protects substrates from Carbonation Excellent weathering resistance Elastic nature Allows structure to "breathe" Water based and non-toxic Easy to clean Single pack and easy to apply
- Mineral and masonry substrates e.g. cement plasters and cement renders must be completely dry, hard and free of shrinkage and movement
- Remove mold oil from concrete surfaces
- For renovation the substrate should be free of old plaster and any loose material and peeling paint
- Apply weber cote beton with a brush or roller
- Do not apply on wet or frozen surfaces, or where there is a risk of freezing within the next 24 hours
- Avoid application in full sunlight or in a strong wind
- On large surfaces, it is good practice to interrupt application around joints and rain channels
- If higher thickness then 300 microns is required, a third coat could be applied.