weberpas PR 300 ultime color
weberpas PR 300 ultime color
Acrylic water based primer
weberpas PR 300 ultime color is used as a primer coat to provide the substrate with a homogenous absorption giving the treated area a uniform aspect. It is used before the application of weberpas deco 310 ultime color, 330, 350 and 355 over cementitious, gypsum and wood substrates.- Breathable
- Crack free
- Decorative finish
- Easy to apply & clean
- External application
- Faster job
- UV resistance
- Water resistance
Surface of application
Wall
| Qatar | Lebanon | Jordan | Kuwait | Oman | KSA | UAE |
|---|---|---|---|---|---|---|
| 20Kg | 20Kg | 20Kg | 20Kg | 20Kg | 20Kg | 20Kg |
- UV resistant
- Water resistant
- Wide range of colors
- Substrate must be clean, sound and free from greasy matters and dust.
- Remove all traces of paint, mould oil which may affect the adhesion.
- Before the application the substrate must be sufficiently cured in a way that any shrinkage has already occurred.
- Before the application of weberpas PR 300 ultime color, moisten the substrate and wait until it becomes dry at the surface.
- weberpas PR 300 ultime color is applied using a paint brush or woolen roller
- Thinning is unnecessary, but if required to obtain desired application properties, a small amount of clean water not more than 0.5 liter/ 20 Kg pail may be added. Two coats are usually recommended to obtain satisfactory results applied in crossed layer.
- The first layer must be dry before the application of the second one