weberfloor topcoat PU New Product
weberfloor topcoat PU
UV stable solvent based polyurethane coating
weberfloor topcoat PU is a two component, solvent based aliphatic iso-cyanate polyurethane coating known for its excellent physical properties, including high durability, flexibility, and resistance to abrasion and chemicals. The fully cured coating has excellent stability to UV light, It also has excellent hiding capability and color stability, more-over, it is a non-yellowing and non-chalky product. weber-floor topcoat PU is available in colored forms with gloss or matt finish.
| UAE | KSA | Oman | Qatar | Jordan | Kuwait |
|---|---|---|---|---|---|
| 18 Lit | 18 Lit | 18 Lit | 18 Lit | 18 Lit | 18 Lit |
- UV stable
- Color stable
- Indoor and outdoor
- Crack bridging
- Excellent hiding capability
- Excellent abrasion
- High wear
- Waterproof
- Excellent coverage
- Maximum substrate moisture content should not exceed 5% (CM)
- Surface tensile adhesion shall not be less than 1 MPa
- Over coating time at 70 microns thickness: minimum 24 hours
- Pedestrian traffic at 70 microns : 48 hours
- Full load at minimum 7 days
- Pot life : 45 min at 25 °C
- Recommended for UV exposed application
- Not applicable on wet substrate