weberjoint protect
weberjoint protect
Anti-Bacterial CG2WA Tile Grout
weberjoint protect is a CG2WA tile grout equipped with protect3 technology that protects against Bacteria, Fungus and Algae.weberjoint protect is ideal for use in indoor wet areas while being an excellent solution for outdoor tile grouting with tile joint widths up-to 7mm.
The special additives of weberjoint protect allows it to be actively eradicating Bacterial colonies, Black Mold, Fungus and Algae growth making weberjoint protect is a perfect solution for attaining hygienic surfaces.
Hygienic surfaces are most favorable in bathrooms, kitchens, food industries, hospitals, kindergartens and households with infants and children.
- Anti fungus
- Anti-crack
- Crack free
- Decorative finish
- External application
- Faster job
- Low shrinkage
- Low VOC
- Resistant to mold formation
- Water resistance
- Wide range of colors
Surface of application
External floor, Wall, Floor, Roof
| KSA |
|---|
| 5 kg, 10 kg |
- Up to 7mm joint thicknesses
- Mixing water ratio as per the data sheet
- Apply 24 hours minimum after standard tile adhesives application
- Apply 4 hours minimum after fast-setting tile adhesives application
- Apply 14 days minimum after tiling with traditional "site-mix" mortar on floors (minimum 3 days for walls)
- Substrate must be fully cured, set and dry prior to grouting
- All traces of oil or grease must be removed
- All loose particles of mortar or tile adhesive in the groove must be physically removed (joints should be emptied to at least 2/3 of the tile thickness)
- Avoid excess of water while cleaning to prevent discoloration of joints
- Setting time: 1h 15 minutes
- It is recommended to use a moist sponge rather than excessive water pouring for cleaning the tiles and the dried grouts
- Do not spray water under high pressure and avoid using any chemical cleaning agent on the grout until 3 days after the application.