weberfloor 4825 LT

New Product
Weber Middle East

Weberfloor 4825 LT is a solvent-free, very low emission and low odor dispersion adhesive, ready for use and perfectly designed for the installation of all common linoleum and textile coatings. It is based on a very special type of synthetic resin with very high performance additives, fine grade mineral fillers to produce a high adhesion degree.

Surface of application


Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman
16 kg 16 kg 16 kg 16 kg 16 kg 16 kg 16 kg 16 kg

Documentation and brochures

To know before applying

The adhesive must be stirred before use and then applied and spread evenly with a toothed spatula.
Apply floor 4825 LT uniformly on the substrate using an A2 trowel. Allow the product to cure for approx. 5 to 15 minutes before laying the floor covering (depending on the temperature and substrate)

For more information please refer to the technical data sheet of the product

Features and benefits

 Easy to apply
 No discoloration even in thin coatings
 Suitable for hotel luggage's carrier
 Excellent initial adhesion
 EMICODE EC1 PLUS: very low emission
 Excellent Tack and Bonding
 Excellent Adhesion and high Strength
 Water Resistant
 Non Toxic and Non Flammable


It is essential to ensure good contact between the floor covering and the adhesive.
Bonding over existing floor coverings should be avoided.
Clean any excess of adhesive using water immediately.
Do not allow the adhesive to dry, after complete dryness of the adhesive ridges, covering laying is no longer possible.
Make sure to Avoid any holes after spreading the product.

This product fits for these following projects