weberjoint / weberjoint thick
Cementitious tile grout
weberjoint is a cement-based pre-mixed non-shrink grout, used for filling tile joints in wet and dry areas.weberjoint is water resistant, easy to apply, and can be cleaned easily. It is a thixotropic, crack-free, non-slump grout that only needs to be mixed with water. It is also available in a wide range of attractive colors (please consult our color chart board).
- Crack free
- Water resistance
- External application
- Easy to apply & clean
- Unique esthetical style
- Low shrinkage
- Decorative finish
- High strength
- Suitable for wide range of tiles
- Non-slip
Surface of application
External floor, Floor, Roof, Wall
Colors
| Lebanon | UAE | KSA | Oman | Qatar | Kuwait | Jordan | Egypt |
|---|---|---|---|---|---|---|---|
| 5 kg, 25 kg | 5 kg, 20 kg, 25 kg | 10 kg, 20 kg, 25 kg | 5 kg, 20 kg, 25 kg | 5 kg, 20 kg, 25 kg | 5 kg, 20 kg, 25 kg | 5 kg, 20 kg, 25 kg | 5 kg |
- Easy to apply and clean
- Thixotropic Non-slump grouts
- Water resistant
- Non-shrink grout
- Crack-free
- Only need to be mixed with water
- Large range of colors
- Mixing water ratio as per the data sheet
- weberjoint thin for joint width 1 to 4mm
- weberjoint thick for joint width 4 to 8mm
- Apply 24 hours minimum after standard tile adhesives application
- Apply 4 hours minimum after fast-setting tile adhesives application
- Apply 14 days minimum after tiling with traditional "site-mix" mortar on floors (minimum 3 days for walls)
- Substrate must be fully cured, set and dry prior to grouting
- All traces of oil or grease must be removed
- All loose particles of mortar or tile adhesive in the groove must be physically removed (joints should be emptied to at least 2/3 of the tile thickness)
- Avoid excess of water while cleaning to prevent discoloration of joints
- It is recommended to use a moist sponge rather than excessive water pouring for cleaning the tiles and the dried grouts
- Do not spray water under high pressure and avoid using any chemical cleaning agent on the grout until 3 days after the application
