weberdry 110 FX

formerly Waterproof.110/120 FX
weberdry_110_FX.jpg

 

Flexible high-performance cement-based waterproof coating weberdry 110 FX is a two component polymer modified cementitious coating:

 

  • Powder made of cements, fillers and admixtures.
  • Liquid based on resins and additives.

It is available in Grey (formerly Waterproof.110FX) and White (formerly Waterproof.120FX). 
weberdry 110 FX cures to form an elastomeric, waterproof, flexible and resistant membrane, suitable for use in potable water tanks, reservoirs, canals and tunnels. 
The material which can be applied on cement based substrate like concrete, cement plaster, masonry and gypsum board substrates has been designed to accommodate good crack bridging qualities even after long term water immersion.  
weberdry 110 FX must be used on damp cement based substrates.
The adhesion and sealing qualities of weberdry 110 FX are outstanding. Therefore, it can be used for positive or negative hydrostatic pressures. 
The material prevents reinforcements from corrosion.

Surface of application

Wall, Floor

Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman

15 kg

kit

15 kg

kit

15 kg

kit

15 kg

kit

22.5 kg

kit

15 kg

kit

22.5 kg

kit

22.5 kg

kit

- -

30 kg

kit

30 kg

kit

- - - -

Documentation and brochures

To know before applying

  • The substrate must be perfectly sound, clean, and free from grease, oil, dust or any friable matters.
  • Recommended cleaning methods are high pressure water cleaning and sandblasting.
  • Any damage or concrete defect should be repaired in advance.All corners should be saw-cut and filled with a non-shrink thixotropic mortar like weberep 331 TX. All honeycombs or holes should be widened and filled with a non-shrink mortar like weberep 350 NSG.
  • It is necessary to stop any running water prior to the application of weberdry 110 FX. Use a fast setting cementitious plugging mortar (weberdry 150 BLC) to seal water leaks.
  • Before applying weberdry 110 FX, damp abundantly the substrate to be treated

For more information please refer to the technical data sheet of the product

Features and benefits

  • Easy to apply.
  • Approved for contact with potable water.
  • Resists high hydrostatic positive and negative pressures.
  • Long working life.
  • Excellent crack accommodation.  
  • Excellent adhesion.
  • Permeable to water vapor.
  • Resistant to abrasion.
  • Reduces carbonation and electrochemical corrosion.
  • Non-toxic and chloride-free.

Constraints

  • Wherever tiling on weberdry 110 FX is required, webercol flex should be used.
  • It is recommended that the tiling start after one week from the application of weberdry 110 FX.
  • When needed, flood test on weberdry 110 FX can be carried out prior tiles fixing.
  • Allow one week curing before flood test.
  • Immediately after application is completed clean all tools and equipment with clean water.

This product fits for these following projects