weberprim EP 2K

Weber Middle East

weberprim  EP 2K is a transparent, rigid, two component epoxy primer. Water-based, used as a universal primer in waterproofing, sealing and floor coating applications on absorbent and non-absorbent surfaces. Cures by reaction (cross linking) of the two components.

Surface of application

Wall, Floor

Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman
4 kg 4 kg 4 kg 4 kg 4 kg 4 kg 4 kg 4 kg
20 kg 20 kg 20 kg 20 kg 20 kg 20 kg 20 kg 20 kg

Documentation and brochures

To know before applying

  • All surfaces should be clean, dry and free from grease, laitance, oil or dust. Remove all loose material.
  • Moisture content should not exceed 7%. 
  • Substrate compressive strength  should be at least 25 MPa
  • Possible surface irregularities need to be smoothened.

For more information please refer to the technical data sheet of the product

Features and benefits

  • Simple application (roller or brush)
  • Excellent anchoring to absorbent and non-absorbent surfaces
  • Can be applied on moist surfaces, without loss of adhesion
  • Resistant to stagnating water
  • Can be diluted with water
  • Provides high tensile and impact strength
  • Chemical resistant

Constraints

  • The mixing of the components has to be effected very thoroughly, especially on the walls and bottom of the pail until mixture becomes homogeneous.
  • For best results, the temperature during application and cure should be between 5°C and 35°C.

This product fits for these following projects