weberfloor 600 SCR
Dry ready mix screed fiber reinforced
weberfloor 600 SCR is a ready mixed cementitious screed made with selected aggregates, additives and fiber. Ready to use, weberfloor 600 SCR is to be simply mixed with water on site. It can be used to level the surface prior to the installation of other underlay flooring products such as weberfloor smooth FD ,weberfloor 525 FD or weberfloor 535 FD. Tiles can be laid down on top of weberfloor 600 SCR after screed has fully acquired its compressive strength.
- High strength
- Easy to apply & clean
- Suitable for wide range of tiles
- Faster job
Surface of application
|50 kg, 25 kg||50 kg, 25 kg||50 kg, 25 kg|
- Fiber reinforced
- Easy workability.
- Surface leveling before other floor products.
- Easy to apply.
- Application maximum thickness 5 cm per layer.
- Can be covered with tiles.
- Primer should be applied before applying the screed.
- Not applicable on wet substrate.
- Not suitable to be covered with PVC, vinyl, rubber, linoleum, parquet.
- Not applicable over tiles, or wood substrate.