weber euroflor prime New Product
weber euroflor prime
High performance acrylic flooring primer
weber euroflor prime is a primer styrene acrylate dispersion which can be diluted with water and is intended for use prior to the application of weber euroflor Design and weber euroflor Terrazzo.It is used as a pore sealer on floor surfaces to prevent air bubbles rising through subsequently applied sub-floor layer and to prolong their flow life and workability.It also creates an excellent bond between the concrete substrate and the next overlay.
- Abrasion resistance
- Anti-crack
- Cleaner site
- Decorative finish
- Easy to apply
- Eco-friendly
- Extended open time
- Faster job
- High adhesion
- Low VOC
- External application
- Crack free
- Suitable for difficult substrates
Surface of application
Floor
| UAE |
|---|
| 5 lit |
- Excellent bonding
- Prevents air bubbles
- Offers good alkali resistance and adhesion properties in both wet and dry environments
- Regulates the porosity of the substrates
- Improves the adhesion of flooring products
- Reduces the formation of pinholes in the sub-floor
- Can be spray applied for use on large area
- Does not contain ammonia
- weber euroflor prime should be strictly diluted with cool clean water using a graduated container, to the appropriate ratios.
- The substrate must be vacuumed and primed with weber euroflor prime, using a soft brush or a roller.
- For dry and porous substrate, apply weber euroflor prime in 2 coats, with water dilution at the ratio 1:1
- After applying weber euroflor prime, the waiting time should be from 30 minutes to 3 hours,and no longer than 24 hours.
