weberfloor epobat-L
Product formerly named: formerly Epobat
Available packaging
| Lebanon | Syria | Jordan | KSA | UAE | Qatar | Kuwait | Oman |
| 20 L | 20 L | - | - | - | - | - | - |
Solvent free heavy duty epoxy floor coating
Surface of application
Floor
weberfloor epobat-L is a two-component solvent-free epoxy flooring coating. It is a high performance self-smoothing product, easy to apply, leaving a durable seamless surface, specially formulated as heavy duty concrete coating for floor.The product consists of pre-weighed colored resin and hardener components. weberfloor epobat provides a hard wearing and abrasion resistant floor finish for basement, warehouses, industrial factories, ground floor car parks, traffic decks with no structural movement... Along a high resistance to chemicals and salts. It can also be used as a rust preventive coating for concrete and steel tanks and other surfaces subjected to chemical attacks and corrosion.
- Waterproof
- Impermeable
- High wear, abrasion and slip resistant surface possible
- Anti-carbonation and stops chloride ion diffusion
- Hygienic, anti-bacterial and anti-fungus growth
- Suitable for use in hot and tropical climate conditions
- Odorless
- Maximum substrate moisture content should not exceed 5%
- Sustrate surface tensile adhesion shall not be less than 1MPa
- Applicable by brush or roller
- Max over coating delay @ 25°C: 24 hours
- Light traffic use after: 24 hours
- Heavy traffic use after: 48houts
- Dry film thickness per coat: 250 microns
- Not applicable on wet substrate
- Recommended for internal application
- Not applicable on surface temperature above 40°C or below 5°C