weberfloor epopark
Solvent free epoxy mortar for flooring systems
Weberfloor Epopark is a solvent free three component epoxy mortar designed to provide continuous protection for concrete floors. It can be used up to 10 mm thickness and it provides excellent abrasion and good chemical resistance.
Surface of application
Floor
| Lebanon | UAE | KSA | Oman | Qatar | Kuwait |
|---|---|---|---|---|---|
| 20 kg, 27.5 kg | 20 kg, 27.5 kg | 20 kg, 27.5 kg | 20 kg, 27.5 kg | 20 kg, 27.5 kg | 20 kg, 27.5 kg |
- Solvent-Free three component epoxy mortar.
- Continuous protection for concrete surface.
- Excellent abrasion resistance.
- Good chemical resistance.
- Maximum substrate moisture content should not exceed 5% (CM).
- Substrate surface tensile adhesion shall not be less than 1MPa.
- Over coating time at 3 mm thickness: minimum 48 hours and max 7 days.
- Tack free at 3mm thickness: 4 hours 30 min.
- Pedestrian traffic at 3mm thickness: 48 hours.
- Road traffic at 3mm thickness: 7 days.
- Consumption: 6kg/m2/3mm.
-
Pot life : 1 hour at 20°C. - Not recommended for external application.
- Not applicable on wet substrate.
- Not applicable at thickness below 3mm.
