weberfloor epolevel

Solvent free epoxy product designed to repair and level substrates.
Weberfloor epolevel is a 3 components solvent free epoxy product, especially designed to repair and level floors prior to
the application of Polyurethane and epoxy screeds or coatings.
Surface of application
Floor
OMAN | UAE |
---|---|
19 Kg | 19 kg |
- Solvent-Free three component epoxy mortar.
- Very high flexural strength.
- Excellent abrasion resistance.
- Good chemical resistance.
- High flowability.
- Excellent yield.
- Easy to apply.
- Cost effective.
- Maximum substrate moisture content should not exceed 5% (CM)
- Surface tensile adhesion shall not be less than 1MPa
- Over coating time at 3 mm thickness: minimum 48 hours and max 7 days
- Tack free at 3mm thickness: 4 hours 30 min
- Pedestrian traffic at 3mm thickness: 48 hours
- Road traffic at 3mm thickness: 7 days
- Consumption: 1.6 kg/m2/1mm
Pot life :4 hours at 25°C- Not recommended for UV exposed application
- Not applicable on wet substrate
- Not applicable at thickness below 1 mm