weberfloor epopark-LProduct formerly named: formerly Epopark.3 MM
PRODUCT Two component epoxy mortar designed to provide continu-ous protection for concrete floors. weberfloor epopark-L provides a flowable consistency, excellent levelling that can be applied up to 10mm thickness. It provides excellent abrasion and good chemical resistance.
- Solvent-based two component epoxy mortar.
- Continuous protection for concrete surface.
- Excellent abrasion resistance.
- Good chemical resistance.
- Maximum substrate moisture content should not exceed 5%
- Sustrate surface tensile adhesion shall not be less than 1MPa
- Over coating time at 3 mm thckness: minimum 48 hours and max 7 days
- Tack free at 3mm thickness: 4 hours 30 min
- Pedestrian traffic at 3mm thickness: 48 hours
- Road traffic at 3mm thickness: 7 days
- Consumption: 6kg/m2/3mm
Pot life: 1 hour at 20°C
- Not recommended for external application
- Not applicable on wet substrate
- Not applicable at thickness below 3mm