weberfloor epo HB 50

Product formerly named: formerly Epofloor.H.B. 50
weber.floor_epo_HB_50.jpg

 

Solvent based epoxy floor coating weberfloor epo HB 50 is a high quality two-component epoxy coating for floors. It has good self-leveling properties, excellent resistance to abrasion, water and chemicals.

 

Surface of application

Floor

Available packaging

Lebanon Syria Jordan KSA UAE Qatar Kuwait Oman
20 L kit 20 L kit 20 L kit 20 L kit 20 L kit 20 L kit 20 L kit 20 L kit

Documentation and brochures

To know before applying

  • Maximum substrate moisture content should not exceed 5%
  • Sustrate surface tensile adhesion shall not be less than 1MPa
  • Applicable by brush or roller
  • Drying time: 1to 2 hours at 30°C
  • Wet film thickness: 130 microns/coat
  • Dry film thickness: 125 microns/coat
  • Mixing at low rotation speed (<300 rpm)

For more information please refer to the technical data sheet of the product

Features and benefits

  • High quality two component epoxy coating for floors.
  • Good self-leveling properties.
  • Resistant to abrasion, water and chemicals.

Constraints

  • Not applicable on wet substrate
  • Recommended for internal application
  • Not applicable on surface temperature above 40°C or below 5°C

This product fits for these following projects