weberfloor epopatch New Product
High strength, solvent free epoxy resin patching compound for surface irregularities
Weberfloor epopatch is a 2 components solvent free epoxy product, especially designed to repair minor imperfections in concrete substrates and to level floor prior to the application of floor coatings systems, self-leveling, screeds or decorative flooring compounds. weberfloor epopatch could be applied internally or externally for filling pinholes, repairing, and levelling differences in thicknesses up to 3 mm, for a wide range of light and heavy-duty use, with various levels of mechanical and chemical exposures.- Abrasion resistance
- Anti fungus
- Anti-crack
- Chemical resistance
- Cleaner site
- Crack bridging
- Crack free
- Easy to apply
- Easy to apply & clean
- Easy to clean
- Extended open time
- External application
- Faster job
- Fast-setting
- High adhesion
- High strength
- Mechanical resistance
- non toxic
- Suitable for difficult substrates
- Suitable for old & new concrete
- Thixotropic
- Two component
Surface of application
Floor
- Excellent yield
- Easy to apply
- Cost effective
- Fast curing
- Thixotropic
- Strong adhesion to concrete
- Non shrink product
- High flexural strength
- High Compressive strength
- Multi-packaging
- Maximum substrate moisture content should not exceed 5% (CM)
- surface tensile adhesion shall not be less than 1MPa
- Over coating time at 3 mm thickness: minimum 48 hours and max 7 days
- Tack free at 3mm thickness: 4 hours 30 min
- Pedestrian traffic at 3mm thickness: 48 hours
- Road traffic at 3mm thickness: 7 days
- Consumption: 1.65 kg/m2/1mm
-
Pot life : 45 min at 25°C - Not recommended for UV exposed application
- Not applicable on wet substrate
- Not applicable at thickness > 1 mm