weberfloor epobat - k
Solvent Free Epoxy Floor coating
weberfloor epobat-K is a two-component solvent-free epoxy flooring coating. It is a high performance self-smoothing product, easy to apply, leaving a durable seamless surface, specially formulated as heavy duty concrete coating for floors.The product consists of pre-weighed colored resin and hardener components. weberfloor epobat-K provides a hard wearing and abrasion resistant floor finish for basement, warehouses, industrial factories, ground floor car parks, traffic decks with no structural movement, along a high resistance to chemicals and salts. It can also be used as a rust preventive coating for concrete and steel tanks and other surfaces subjected to chemical attacks and corrosion.
Surface of application
Floor
| KSA |
|---|
| 26 kg, 13 kg, 5 kg |
- Waterproof.
- High abrasion and slip resistant surface.
- Anti-carbonation and stops chloride ion diffusion.
- Hygienic, anti-bacterial and fungus growth.
- Odorless.
- Suitable for hot climates.
- Maximum substrate moisture content should not exceed 5% (CM).
- Substrate surface tensile adhesion shall not be less than 1MPa.
- Applicable by brush or roller.
- Touch dry time at 25°C: 7 hours.
- Max over coating delay @ 25°C: 12 to 36 hours.
- Dry film thickness: 200 microns/coat.
- Not applicable on wet substrate.
- Recommended for internal application.
- Not applicable on surface temperature above 40°C or below 5°C.
